THE IMPACT OF DOOR LEAF PARAMETERS ON THE EFFICIENCY OF THE AUTOMATED TECHNOLOGICAL LINE

Authors

  • Dorota Michalak Poznań University of Life Sciences, Poland
  • Zdzisław Kwidziński Porta KMI Poland
  • Łukasz Sankiewicz Porta KMI Poland
  • Bartłomiej Knitowski Porta KMI Poland
  • Joanna Bednarz University of Gdańsk, Sopot, Poland
  • Marcin Drewczyński General Engeenering Solutions, Poland
  • Tomasz Rogoziński Poznań University of Life Sciences, Poland
  • Marta Pędzik Poznań University of Life Sciences, Poland

Keywords:

wooden door manufacturing; product classification; takt time; colour finish; door leaf width; door leaf rebate.

Abstract

The automated intelligent technological line for the mass production of door leaves enables mass customization using unique QR codes. The IT control system dynamically adjusts the processing parameters to the currently processed door leaf, allowing the line modules to fine-tune the settings. Door leaves categorized by colour, width and the presence of a rebate were tested in terms of efficiency. The time elapsed between the cycle completion on the line of two consecutive leaves in a series and the time changes depending on the product parameters are measured in the experiment. The results showed a significant impact of item classification on line efficiency. Colour sorting halves the takt time while sorting by width and the presence of rebates results in an efficiency increase of more than six times with the same technology and high quality.

References

Aurand, S.S., Miller, P.J., n.d. The operating curve: a method to measure and benchmark manufacturing line productivity, 1997 IEEE/SEMI Advanced Semiconductor Manufacturing Conference and Workshop ASMC 97 Proceedings. IEEE, pp. 391–397. https://doi.org/10.1109/ASMC.1997.630768

Barański, J., Klement, I., Vilkovská, T., Konopka, A., 2017. High Temperature Drying Process of Beech Wood (Fagus sylvatica L.) with Different Zones of Sapwood and Red False Heartwood. Bioresources 12. https://doi.org/10.15376/biores.12.1.1861-1870

Ebrahim, Z., Abdul Rasib, A.H., Muhamad, M.R., 2015. Understanding Time Loss in Manufacturing Operations. Applied Mechanics and Materials 761, 619–623. https://doi.org/10.4028/www.scientific.net/AMM.761.619

Ehteshami, B., Petrakian, R.G., Shabe, P.M., 1992. Trade-offs in cycle time management: hot lots. IEEE Transactions on Semiconductor Manufacturing 5, 101–106. https://doi.org/10.1109/66.136270

Kalir, A.A., 2023. Optimizing Factory Performance for Unit Cost in Semiconductor Manufacturing. Open Journal of Optimization 12, 61–71. https://doi.org/10.4236/ojop.2023.122005

Klarin, M., Spasojević-Brkić, V.K., Golubović Sedmak, T., Stanisavljev, S., Brkić, A., Sajfert, Z., 2016. Production cycle time reduction in low and medium-low-tech companies: a case study for Serbia. Tehnicki vjesnik - Technical Gazette 23. https://doi.org/10.17559/TV-20140715130015

Kwidziński, Z., Chodnicki, M., Sankiewicz, Ł., Knitowski, B., Rogoziński, T., 2024. Influence of Finishing Colour on the Efficiency of Automated Production Line for Wooden Doors, in: Flexible Automation and Intelligent Manufacturing: Establishing Bridges for More Sustainable Manufacturing Systems. Proceedings of FAIM 2023, pp. 216–224. https://doi.org/10.1007/978-3-031-38165-2_26

Kwidziński, Z., Hanincová, L., Tyma, E., Bednarz, J., Sankiewicz, Ł., Knitowski, B., Pędzik, M., Procházka, J., Rogoziński, T., 2022. The Efficiency of Edge Banding Module in a Mass Customized Line for Wooden Doors Production. Applied Sciences 12, 12510. https://doi.org/10.3390/app122412510

Patel, H., Shah, S.C., 2014. Review on Cycle Time Reduction in Manufacturing Industries. J Emerg Technol Innov Res 1.

Pędzik, M., Bednarz, J., Kwidziński, Z., Rogoziński, T., Smardzewski, J., 2020. The idea of mass customization in the door industry using the example of the company porta KMI Poland. Sustainability (Switzerland) 12. https://doi.org/10.3390/su12093788

Sherman, J.D., Souder, W.E., Jenssen, S.A., 2000. Differential Effects of the Primary Forms of Cross Functional Integration on Product Development Cycle Time. Journal of Product Innovation Management 17, 257–267. https://doi.org/10.1111/1540-5885.1740257

Taifa, I.W.R., Vhora, T.N., 2019. Cycle time reduction for productivity improvement in the manufacturing industry. Journal of Industrial Engineering and Management Studies 6, 147–164.

Weber, C.M., Fayed, A., 2010. Scale, Scope, and Speed—Managing the Challenges of Multiproduct Manufacturing. IEEE Transactions on Semiconductor Manufacturing 23, 30–38. https://doi.org/10.1109/TSM.2009.2039249

Zhang, M.T., Tag, P.H., 2006. Cycle Time Reduction Through Preventive Maintenance De-clustering, 2006 IEEE International Symposium on Semiconductor Manufacturing. IEEE, pp. 70–73. https://doi.org/10.1109/ISSM.2006.4493025

Zhao, Y., Xu, X., Li, H., Liu, Y., 2018. Stochastic customer order scheduling with setup times to minimize expected cycle time. Int J Prod Res 56, 2684–2706. https://doi.org/10.1080/00207543.2017.1381348

Downloads

Published

2024-12-11

How to Cite

Michalak, D., Kwidziński, Z., Sankiewicz, Łukasz, Knitowski, B., Bednarz, J., Drewczyński, M., Rogoziński, T., & Pędzik, M. (2024). THE IMPACT OF DOOR LEAF PARAMETERS ON THE EFFICIENCY OF THE AUTOMATED TECHNOLOGICAL LINE . Acta Facultatis Xylologiae Zvolen, 66(2), 115–124. Retrieved from https://ojs.tuzvo.sk/index.php/AFXZ/article/view/110

Issue

Vol. 66 No. 2 (2024): Acta Facultatis Xylologiae Zvolen

Section

Articles

License

Copyright (c) 2024 Dorota Michalak, Zdzisław Kwidziński, Łukasz Sankiewicz, Bartłomiej Knitowski, Joanna Bednarz, Marcin Drewczyński, Tomasz Rogoziński, Marta Pędzik

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

The Journal publishes in an open access model. It provides immediate open access to its content under the Creative Commons BY 4.0 license.